What to do if Oasis Heat Pump displays low pressure protect error?
If your Oasis Heat Pump is showing a low-pressure protection error, it indicates that the suction pressure is low, activating the low-pressure switch. You should check the low-pressure switch and the cooling return circuit to address this problem.
What to do if Oasis ELITE AC9 shows flow switch failure?
If you're experiencing a flow switch failure with your Oasis Heat Pump, it's likely due to insufficient water in the system. You should check the flow volume and verify the water pump's functionality to resolve this issue.
Why does my Oasis ELITE AC9 Heat Pump show high pressure protection?
If your Oasis Heat Pump is showing a high-pressure protection error, it means the exhaust pressure is too high, triggering the high-pressure switch. To fix this, check the high-pressure switch and the cooling return circuit.
Why is there a large temp difference in my Oasis ELITE AC9 Heat Pump between water inlet and outlet?
If the temperature difference between the water inlet and outlet is too significant in your Oasis Heat Pump, it may be due to insufficient water flow or a small water system pressure difference. Check the flow volume and inspect the water system for any blockages.
How to fix communication failure on Oasis ELITE AC9 Heat Pump?
If your Oasis Heat Pump is experiencing a communication failure, it means there's a problem in communication between the remote wire controller and the main board. You should check the wire connection between these two components.
Why is my Oasis ELITE AC9 antifreezing in cooling mode?
If your Oasis Heat Pump is antifreezing under cooling mode, it's likely due to insufficient water flow volume. You should check the flow volume and ensure the water system isn't jammed.
What causes water outlet temp sensor failure in Oasis Heat Pump?
If you're facing a water outlet temperature sensor failure with your Oasis Heat Pump, it's probably because the sensor is open or short-circuited. To resolve this, check or replace the water outlet temperature sensor.
How to troubleshoot water inlet temp sensor failure in Oasis ELITE AC9 Heat Pump?
If your Oasis Heat Pump is showing a water inlet temperature sensor failure, it's likely because the sensor is either open or short circuit. To fix this, check or change the water inlet temperature sensor.
What does ambient temp sensor failure mean on Oasis ELITE AC9 Heat Pump?
If you encounter an ambient temperature sensor failure in your Oasis Heat Pump, it's likely because the sensor is open or short circuit. To resolve this, check or replace the ambient temperature sensor.
What should I do if my Oasis Heat Pump shows pipe temp sensor failure?
If your Oasis Heat Pump displays a pipe temperature sensor failure, it indicates that the sensor is either open or short circuit. You should check or replace the pipe temperature sensor to resolve this issue.
To Next Page
General
