EasyManua.ls Logo

Oasser CW6 - Maintenance

Oasser CW6
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
Before maintenance, please make sure and appliance is off, place it on the flat surface and disconnect the
mains plug.
Prior to long periods of storage, pull out the filter(19) and rinse with water. Disassemble the gun and high
pressure hose.
Unscrew the coupling between high pressure hose and water outlet. Remove the hose from the appliance.
Pull out the filter in the water inlet and rinse with water (pic J). Use needle to clean the residue if
necessary (pic M).
Put away the power cord, high pressure hose and other accessories.
In winter, make sure the appliance is properly stored. Please do not put it outside
without draining the water to avoid the damage to the appliance. Please store it in a
room that does not reach freezing temperature.
Maintenance
4
Detergent
water
N
ON
1
OFF
0
2
1

Related product manuals