Please check if the accessories are complete first. If something missing, please contact us.
Install accessories before start-up.
Connect the adapter we provide to the water inlet on the appliance, then install the garden hose.
The garden hose for water inlet connection is not included in the package box. Please make sure that the
size of your hose is G3/4 thread of British standard.
Note: Please check if there is a rubber seal and a filter in the adapter. If they fell out, or left in the
packing box, just put them back. Because no matter which one is missing, it will cause leaks. Besides, be
sure that both ends of the water inlet hose adapter must be screwed tightly. Especially note that there must
be no looseness between the black part and the aluminum part of the water inlet hose adapter, or it will
cause leak of water.
1.Water Inlet Garden Hose
Two Ways of Water Sucking
I.Water Tap
You can put the water inlet hose into a large container filled with water for self-priming, please use the
water inlet hose not exceeding 2M ( 6.5ft ).
II.Suck Water Automatically
Technical Specification
Installation Steps
English
Voltage: AC 100~120V (American Standard)
Working pressure: 1828psi
Working temperature: 5-50°C
Max. flow rate: 1.85GPM (420L/h)
Power: 1800W
Max. pressure: 3046psi
Water temperature: 0 ～40°C
Max. water inlet pressure: 0.4Mpa
01 02 03 04 05 06 07
To Next Page
Loading...