OBaby Lisa Cot Bed - Changing the Cot into a Junior Bed; Removing Side Rails; Lowering Cot Base; Final Screw Tightening

Page Five
www.obaby.co.uk
Changing the Cot into a Junior Bed
Step 1
Remove both side rails using the allen key.
Only change into a Junior bed when your are confident that you child will be safe without the side rails.
Step 2
Fit the base to the lowest level using the same fittings for the base
that were used for the Cot.
Step 3
Tighten all the screws properly.