Obel Mito Base - Commissioning

14
INSTALLAZIONE, USO E MANUTENZIONE
INSTALLATION USE AND MAINTENANCE
8
Doser
9
Hopper locking rod
10
Start switch (only ATB)
11
Stop switch (only ATB)
MITO BASE – ATT
➢ Remove the hopper lid (A), fill the hopper with coffee beans (K) and open the hopper
closure (I);
➢ Push the light switch (H) on I, or activate the timer (T) to let the equipment working.
➢ Push the hopper locking rod (B), turn the adjustment gear clockwise (C) to bring the
burrs near and get a finer grinding. Turn the adjustment gear anticlockwise (D) to
move the burrs away and get a coarser grinding
MITO ATR - ATB
➢ Remove the hopper lid (A), fill the hopper with coffee beans (K) and open the hopper
closure (I);
➢ Push the light switch (H) on I, the inbuilt light will light up indicating that the grinder
has started
➢ Grinding will automatically stop once the sensor in the doser will detect the
appropriate coffee level
➢ Grinding will automatically start when, acting on the doser lever (F), ground coffee
A
C
D
E
F
H
I
B
K
T
COMMISSIONING