Oberheim OB3 SQUARED - Saving a Combination of Drawstops in the Memory

OB3 SQUARED
Organ Sound Generator
20
- When the SLOW key is pressed, the LED in the key illuminates and the effect is activated
with LOW rotation speed.
- When the FAST key is pressed, the effect gradually changes to HIGH speed rotation.
Press this key again (the LED goes out) to return gradually to the previous condition.
- Press the SLOW key again to disactivate the effect (the LED will go out).
2.5 Saving a combination of drawstops in the memory
First press the DRAWSTOPS key (the key LED illuminates) and use the cursor sliders to
build up the sound you require.
Then keep the DRAWSTOPS key pressed and also select the memory location in which the
programming is to be saved (UPPER MEMORY section keys from I to VI).
Now release the two keys. Your new setup has been saved, ready for recall at any moment.
N.B.
When a new setup is saved, a previous setup will be deleted with no possibility of
retrieval. However, the BULK DUMP procedures can be used to record the presettings
saved in the form of MIDI SYS-EX codes.