Oberheim XK - MIDI; How was MIDI 1.0 Implemented?

MIDI
How was MID11.0 Implemented ?
Channel Modes:
Mode 1 Omni/Poly (This Is the normal mode of the Xk)
Mode 4 OmnI Off/Mono (This is the mode when MIDI Mono Is ON for a selected Zone)
Note Off
status = "lOOOnnnn
Note On
status = 1001 nnnn
Control gpfle
status = 1011 nnnn
Continuous Controller
Foot Switch
Mod Lever Negative
Program Change
status =1100nnnn
Channel Pressure,
status =1101nnnn
Pitch
status = 1110nnnn
Channel Pressure fAffPr-Tfl^h)
status = 1101 nnnn
nnnn = 0 to OFH (Midi Channel 1 to 16)
Sona Selent
status = 11110011
Start
status = 11111010
Stop
status = 11111100
Continue
status = 11111011
Tune
data Okkkkkkk k = 0 to 120
data Owwwv v = 1 to 127
data Okkkkkkk k = 0 to 120
data Ovvwvw v = 1 to 127
dataOccccccc c= 00 to 95
data Occccccc c = 00 to 63
dataOccccccc c = 64to95
dataOccccccc c = 00to63
data Oppppppp p a o to 99
data Owwwv v = 0 to 127
data Owwwv
data Owwwv v = 0 to 7F40H (4000H = center)
data Owwwv v = 0to127
status = 11110110
28