9
English
The direction can be changed manually
The range of the angle is about 100° vertically (90° upwards (30° × 3) 10°
downwards) and 60° horizontally.
Attention
To switch the direction manually, first turn off the power by pressing the •
button.
Changing direction forcibly may damage the fan.
Be careful to avoid pinching your fingers while adjusting the angle.•
Height setting
Telescopic button
You can set the height to three levels with the telescopic button.
While pressing the circular mark of the telescopic button, press and hold the base •
of the main unit, and then increase the height by holding the handle upwards.
As there are three locks that can lock the height, be sure to determine the fixing •
position.
Please use the telescopic button to set the stop position. If the fan stops and *
starts running at the middle of the two fixed positions, it may cause noise or
accident due to instability.
192001aF3FKLT-251DEng.indd9192001aF3FKLT-251DEng.indd9 2019/04/1010:12:252019/04/1010:12:25
To Next Page
Loading...
Need help?
General
