Objecto F5 - Basic Fan Operation; Starting, Stopping, and Air Volume

10
English
Correct Use of the Fan
Start/stop operation
Start operation1.
Simply press the
power button on the main unit or remote control to start the
operation.
In normal use, the air volume and swing angle will default to the setting when it •
was turned off last time because of the memory function.
When the AC adapter is removed from the plug, the device will automatically *
restore the initial settings.
[Initial setting] Air volume: Minimum; Swing: None.
Adjustment of air volume2.
When the fan is on, you can turn the air volume knob on unit to the right or press
+ on the remote control to increase the air volume. Press the knob to the left or
press
− on the remote control to reduce the air volume.
Air volume light band
Weak Strong
E.g.
current air
volume
Operation part of main unit
Turn left − Weak Turn right + Strong
Air volume adjusting knob
Remote control
+ Air volume
Strong
− Air volume
Weak
192001aF5FKLS-302DEng.indd10192001aF5FKLS-302DEng.indd10 2019/04/1018:36:362019/04/1018:36:36