Objecto F5 - Final Assembly and Storage Prep; Securing Grille and Storage Steps

19
English
Align the recess of front grille with the U-shaped print on rear grille. 3.
Fasten the front grille to the rear grille. See Fig.
3 .
Rotate the front grille to the right. See Fig. 4.
4 .
Turn the front grillr to the right untill it is locked.
There will be abnormal noise if the front grille is not locked.
Front grille
U-shaped part
Front grille recess
Align the recess of front grille with the U-shaped part of rear grille, and fasten the front grille
3 ; turn to the right 4 .
4
3
Storage method
After disassembling, please clean and dry the parts.•
Put the dried parts in a plastic bag and put it in the packing box.•
Before packing, adjust the unit top to the front.•
When it is not in use for a long time, take out the battery of the remote control.•
192001aF5FKLS-302DEng.indd19192001aF5FKLS-302DEng.indd19 2019/04/1018:36:372019/04/1018:36:37