Objecto F5 - Installation and Setup; Assembly and Height Adjustment

7
English
Installation and Setup
Attention
Turn on the power only when the blades and guards have been properly
installed.
Assembly of base, middle tube and unit top1.
The middle tube can be removed or installed, and the height can be adjusted.
Enlarged View of Connection
Confi rm the rod and hole size fi rst, and insert the rods into the holes
at the same time.
Lock
The height is about 39” when the product is extended.
Put the base on a stable position. 1
Insert the middle tube into the base. 2
Insert the unit top into the middle tube. 3
Unit top
Middle tube part
Base part
1
2
3
Rear
192001aF5FKLS-302DEng.indd7192001aF5FKLS-302DEng.indd7 2019/04/1018:36:362019/04/1018:36:36