5
We reserve the right for technical changes. V1, August 2021
EN
• Unscrew screws which are holding the
HEPA lter in place by using the
enclosed allen key (1a) (5).
• Remove the HEPA lter from housing
(6)
• Carefully remove the lter packaging
(7).
• Insert the HEPA lter back in the hou-
sing (8).
NOTE:
For every HEPA lter an individual
test certicate is enclosed, proving
its conformity to specied technical
characteristics and applicable stan-
dards (7).
5
6
7
8
5
6
7
8