OC IMP Klima 1000 - Filter Replacement

8
We reserve the right for technical changes. V1, August 2021
EN
17
18
19
8. Filter replacement
When the prelter, placed on the bottom
of the unit (19) or the HEPA lter is con-
taminated, an indicator for lter replace-
ment appears on the display. Please
check the lter specications on the lter
housing (18) and order a new lter at OC
IMP Klima. After receiving the spare lter
follow the same steps as described in the
gures (5 -10).
The same procedure is to be followed
when exchanging the prelter (19), the
lter specication is stated on the label
of the prelter housing. Use the enclosed
allen key (1a) to loosen / tighten the xing
screws.
Contact for spare lters orders:
OC IMP Klima d.o.o.
Godovič 150
SI-5275 Godovič, Slovenia
info@oc-impklima.com
T: +386 37 43 000
NOTE:
Make sure, that the lter replacement
is carried out in a clean environment,
so that the new lter is not contamina-
ted during replacement. The dirty lter
must be disposed of in accordance
with the manufacturer’s instructions.