Problem solving 23
Other error codes
If one of the following error codes appear in the message display, follow
the instructions next to the error code as shown in the table below
Having solved the problem, you can carry on folding your copies.
Error code Possible cause Solution
E1 Covers of the folder are open Close the covers
E2 Paper length longer than 2500 mm
Package fold has max. lengths
din-standard +/- 10 mm
Only copies less than
2500 mm can be folded
Copies are longer than
420 mm or 581mm or 841 mm or 1188
mm(+/- 10 mm), or choose edge fold
E3 Should this error code appear
immediate after switching on the folder
then most probably a sheet was left on
the feed table and the sensor is blocked
Should this error code appear during
the folding process the sensor is faulty
Remove the sheet of paper
Call Océ service
EC Copy is delivered unfolded Copy is shorter than 405 mm
[13] Other error codes
To Next Page
Loading...
