Error code list
Introduction
Location 1: Master Controller errors
01 Communication and common errors
01:09 No response from FF
01:10 No response from CF
01:11 Cover open
01:12 License error: Map fold (panel width is smaller than
160 mm or 6.3 inches)
02 Other communication errors
02:02 No contact to FF during initialization
02:03 No contact to CF during initialization
03 Result codes
03:02 FF: result code is TIMEOUT
03:05 CF: result is TIMEOUT
03:08 Too many sheets are in the folder
09 Start-up and initialization errors
09:02 Time-out while resetting FF
09:03 Time-out while resetting CF
09:10 Checking EEPROM in FF or CF failed
13 Printer messages
13:01 Printer sends an error and folder stops
Location 2: Fan Folder errors
22
Sensor errors on start-up
22:01 Sensor S1 is blocked
22:02 Sensor S2 is blocked
4
Error code list
38
Chapter 6 - Trouble shooting
To Next Page
Loading...
