Beforeusingthee-scooter,makesureyouhavereadandunderstood
all the indications in this manual. Possible injuries or damages
resultingfromincorrectuseofthee-scooterrelievethemanufacturer
andtheretailerfromallliabilityandmaketheuserhimselftheonly
oneresponsibletowardsthecompetentbodies.
Wear the helmet and other personal protective equipment such as knee pads,
elbow guards and gloves correctly.
It is advised to wear at footwear.
- Before using the e-scooter, ensure that all the components are intact (brakes, wheels, lights,
structure, etc.).
- Hold the grips (21) correctly and raise the kickstand (2).
- Unlock the e-scooter (see section “13. LOCK FUNCTION”) to switch on the display (14).
With the “LOCK” function active, the e-scooter will not start.
- Make sure that the battery is sufciently charged.
- Press the ON/OFF key (25) twice to select the desired level of speed ( WALK / 1 / 2 / 3 ).
- Position one foot on the deck and use the other to push yourself forward while maintaining your
balance.
14. USE OF THE E-SCOOTER
108
EN