Need help?Do you have a question about the Ocean Instruments SoundTrap ST300 Series and is the answer not in the manual?
General| Brand | Ocean Instruments |
|---|---|
| Model | SoundTrap ST300 Series |
| Category | Recording Equipment |
| Language | English |
Steps to install the host software and connect the SoundTrap to a PC.
Instructions to verify battery charge and memory status of the SoundTrap.
Details on setting up deployment parameters like recording start and schedule.
How to initiate or stop recording using the infrared remote control.
Steps for reconnecting the SoundTrap and retrieving recorded data.
Explains the different file types generated by the SoundTrap and their formats.
Information on how to charge the internal rechargeable lithium-ion battery.
Guide on connecting and using an external battery pack for extended power.
How to estimate deployment duration based on parameters using a spreadsheet.
Information about the device's internal clock synchronization and accuracy.
Details on logging temperature and accelerometer data.
How to connect and use multiple hydrophones with the ST4300 model.
Guidance on anchoring and deploying the SoundTrap in the water.
Instructions for maintaining the standard and deep housings.
How to obtain and install software and firmware updates for the device.
Specific procedure for updating the MSP firmware, requiring a 9V battery.
Explains factory calibration and how to apply it using different software.
Overview of the high-frequency click detection feature and its purpose.
Technical explanation of the click detection algorithm and its components.
Details on click detection parameters, user settings, and snippet extraction.
Explanation of the various output file formats (.wav, .xml, .dwv, .bcl) from the click detector.
Important notes and warnings regarding the use and limitations of the click detector.
To Next Page
