Need help?Do you have a question about the Ocean Optics HR4000CG-UV-NIR and is the answer not in the manual?
General| Wavelength Range | 200-1100 nm |
|---|---|
| Detector Pixels | 3648 pixels |
| A/D Resolution | 16-bit |
| Signal-to-Noise Ratio | 300:1 |
| Stray Light | <0.05% at 600 nm; <0.10% at 435 nm |
| Fiber Optic Connector | SMA 905 |
| Detector | Sony ILX511B |
| Interface | USB 2.0 |
| Dynamic Range | 2.5 x 10^8 (system); 1300:1 for a single acquisition |
Provides a detailed description of the HR4000 spectrometer's capabilities and features.
Outlines the necessary hardware and software specifications for using the HR4000.
Details the procedure for measuring spectral lines and collecting pixel data for calibration.
Guides users through the steps to calibrate the spectrometer using spectral lines and software.
Instructs on how to save updated calibration coefficients to the spectrometer via USB.
Highlights the unique features of the HR4000CG-UV-NIR model compared to the standard HR4000.
Presents the specific technical specifications for the HR4000CG-UV-NIR spectrometer.
Provides instructions for connecting the HR4000 via USB and serial port modes.
Details the procedure for connecting the HR4000 spectrometer to a PC using a USB connection.
Introduces the chapter that addresses common issues encountered with the HR4000.
Provides steps to resolve issues when the HR4000 is connected before software installation.
Specific troubleshooting steps for Windows OS when the HR4000 installation fails.
To Next Page
