EPIRB1 Pro USER MANUAL
10 912S-03403-02.00 27/07/2020
3.2 Fitting the Float Free Housing
Using the dimensions shown, use the four No10 x 1” screws supplied to secure the fl oat
free housing to the chosen structure using the holes marked ‘O’ on the diagram . For
mounting surfaces constructed of a material unsuitable for these screws use suitable
fi xings (not supplied).
Fixing holes ‘E’ are provided to match the Ocean Signal E100/E100G if this product is being
used to replace these older models.
3.2.1 Mounting Dimensions
To Next Page
Loading...
Need help?
General
