Cleansing and care
Cleaning the toothbrush nozzle
After use, clean the toothbrush nozzle and allow it to
dry. Do not pull the toothbrush nozzle, this can lead to
deformation of the toothbrush.
Cleaning the case
Use clean water to wash the surface of the handle, wipe it
with a soft cloth and allow it to dry. On press rubber seals
with sharp or metal objects, this can lead to damage to
them.
Cleaning the charger
Wipe dirty parts of the charger with a soft cloth. Pull out
the battery connector from the slot before cleaning the
charger. Wipe the surface of the charger with a damp
cloth.
Replace the toothbrush nozzle
Dentists recommend replacing the toothbrush nozzle
every 2-3 months to maintain an optimal level of cleaning.
To Next Page
Loading...
