To Next PageTo Next Page
Need help?Do you have a question about the OEC 9800C-Arm and is the answer not in the manual?
General| Brand | OEC |
|---|---|
| Model | 9800C-Arm |
| Category | Medical Equipment |
| Language | English |
Contains introductory sections of the service manual, likely including title pages and copyright information.
Covers general safety precautions and introductory information about the C-Arm system.
Details the components, functions, and tests related to the C-Arm subsystem.
Explains the AC power distribution within the system, including circuit descriptions and fault isolation.
Details the DC power distribution, including power supply outputs and functional tests.
Covers the battery charging circuitry, functional tests, and fault isolation procedures.
Describes the communication systems, including ARCNet and RS422, and their troubleshooting.
Details the interlock system, its function, tests, and fault isolation.
Explains the stator power and control mechanisms, including functional tests and fault isolation.
Covers the pre-charging function, its circuitry, tests, and fault isolation.
Describes the system's X-ray activation and disabling functions, including tests and fault isolation.
Details the kV generation and control system, including circuit descriptions and calibration.
Explains the mA generation and regulation process, including functional tests and fault isolation.
Covers the Auto Brightness Stabilization circuitry, functional tests, and fault isolation.
Describes the collimator mechanism, its function, tests, and fault isolation.
Details image control aspects, including CCD Camera and Image Intensifier functions.
Explains the cooling systems for the X-ray tube and CCD camera, including fault isolation.
Describes the Flip Flop motion of the C-Arm, its brake, tests, and fault isolation.
Details the orbital motion of the C-Arm, its brake, tests, and fault isolation.
Explains the Wig Wag motion of the C-Arm, its brake, tests, and fault isolation.
Describes the Horizontal Cross Arm motion, its brake, tests, and fault isolation.
Covers the L-Arm motion, hazards, brake, tests, and fault isolation.
Details the Vertical Column motion, its power supply, buttons, tests, and fault isolation.
Explains the steering and braking systems, including casters, balance wheel, tests, and fault isolation.
Provides troubleshooting methods, bootup sequence, error messages, and diagnostic tools.
Covers calibration procedures for power supplies, generator, beam alignment, and cameras.
Provides procedures for replacing various components, covers, PCBs, and assemblies.
