Flip Flop Motion
4. Remove the Brake Handle and reposition it on the shaft so that the Mechanical Brake stop fits in the Brake Handle’s slot.
5. Secure the Brake Handle with the screw.
6. Adjust the position of the second brake handle so that both handles are uniform.
7. If the brake cannot be adjusted, replace the Flip Flop Brake Shoe.
8. The Flip Flop Brake Shoe can be replaced by separating the Flip Flop from the L Arm.
Miscellaneous
Not applicable.
4
Service
Periodic Maintenance
Contents
Schematics
Illustrated Parts
Installation
To Next Page
Loading...
