Vertical Column Lift
Problem Possible Cause Possible Solution
Faulty Fast Stop button Inspect button and replace it if necessary
(see Replacement chapter).
Faulty wiring or connector between
button and P4 on Power/Motor Relay
PCB
Inspect; repair or replace as necessary
(see Replacement chapter)..
Fast stop button does not halt stop
column movement
Faulty Power/Motor Relay PCB Inspect; replace if necessary (see
Replacement chapter)..
Adjustment
The Vertical Column requires no periodic adjustment.
Miscellaneous
Not applicable.
12
Service
Periodic Maintenance
Contents
Schematics
Illustrated Parts
Installation
To Next Page
Loading...
