These Installation and Operating Instructions must be read before
commissioning/using the circulation pump!
The installation, commissioning, maintenance and repairs must be
carried out by qualified specialists (heating specialists/installers).
All DIN, DIN EN, DVGW, VDI and VDE regulations as well as all local
and national guidelines, standards and regulations regarding heating
and water heating systems as well as drinking water installations
must be observed.
If any of the instructions given in these Mounting Instructions
conflict country-specific regulations, the country-specific
regulations must be observed.
8
. Safety information
Content
Circulation pump
OEG UPH
. Safety information
. Application ranges
. Installation
. Electrical connection
. Switching-on the pump
. Maintenance, replacement
and repair
. Technical parameters
. Hydronic characteristic
GB
To Next Page
