OEM Tools 24470 User Manual (English)

To Next Page

UNPACKING

After unpacking unit, inspect carefully for any damage

that may have occurred during transit. Check for loose,

missing, or damaged parts. If any damage is observed, a

shipping damage claim must be ﬁled with carrier. Do not

use the OEMTOOLS Rotary Pump if broken, bent, cracked or

damaged parts (including labels) are noted. Any Rotary Pump

that appears damaged in any way, operates abnormally or is

missing parts should be removed from service immediately.

If you suspect that the Rotary Pump was subjected to shock

load (a load that was dropped suddenly, unexpectedly, etc.)

immediately discontinue use until it has been checked by a

factory authorized service center.

Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect yourself and others by observing

all safety information, warnings, and cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property.

Please retain instructions for future reference.

Operating Instructions and Parts Manual 24470

04/15

2015 ©OEMTOOLS

FOR CUSTOMER SERVICE

Technical Question?

CALL 1-866-458-2472

customerservice@oem-tools.com

ROTARY BARREL PUMP

POLYPROPYLENE

The following safety information is provided as a guideline to help you operate your Rotary Pump under the safest possible conditions. Any tool or piece of

equipment can be potentially dangerous to use when safety or safe handling instructions are not known or not followed. The following safety instructions are to

provide the user with the information necessary for safe use and operation. Please read and retain these instructions for the continued safe use of your service

system. Failure to follow instructions listed below may result in serious injury. In addition, make certain that anyone that uses the equipment understands and

follows these safety instructions as well.

Explanation of Safety Signal Words

CAUTION

WARNING

: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

: Provide clarity and helpful information.

WARNING

CAUTION

NOTES

Thank you very much for choosing an OEMTOOLS Product!

For future reference, please complete the owner’s record below:

Model: _______________ Purchase Date: _______________

Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin