UNPACKING
After unpacking unit, inspect
carefully for any damage that
may have occurred during transit.
Check for loose, missing, or
damaged parts. If any damage
is observed, a shipping damage
claim must be filed with carrier.
Do not use Drill Powered Pump
if broken, bent, cracked or
damaged parts (including labels)
are noted. Any Drill Powered
Pump that appears damaged in
any way, operates abnormally or is
missing parts should be removed
from service immediately. If you
suspect that the Drill Powered
Pump was subjected to a shock
load (a load that was dropped
suddenly, unexpectedly, etc.)
immediately discontinue use until
it has been checked by a factory
authorized service center.
Please read and save these instructions. Read through this owner’s manual carefully before using product. Protect
yourself and others by observing all safety information, warnings, and cautions. Failure to comply with instructions
could result in personal injury and/or damage to product or property. Please retain instructions for future reference.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
Operating Instructions and Parts Manual 24503
03/14
2014 ©OEM-TOOLS
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
MULTIPURPOSE DRILL
POWERED PUMP
WARNING
To Next Page
Need help?
General
