OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ote.com 8
7. When the timer has timed out, the controller will switch to standby mode.
The heater will either be turned o or remain on, depending on the OPT
setting. The display will ash “END” or the “END” and “MAN” beacon
lights will turn on to indicate that the timer program is complete.
8. To exit out of the timer program:
a. If the display reads “END”, simultaneously press and hold the “Page”
and “Scroll” buttons for four seconds.
b. If the “END” and “MAN” beacon lights are both on, press the “Scroll”
button three times. The display will read “M-A”. Press the “Up” arrow
once. The display will read “AUTO”. Simultaneously press and hold
the “Page” and “Scroll” buttons for four seconds. This will return the
temperature controller back to the normal user mode.
To Next Page
Loading...