OFITE, 11302 Steeplecrest Dr., Houston, TX 77065 USA / Tel: 832-320-7300 / Fax: 713-880-9886 / www.ote.com
19
Maintenance
1. Clean the test cell, cell caps, valve stems, and all ttings thoroughly after
each test. Make sure all threads are clean and free of debris. Blow air
through all valve stems and ttings to clean out any remaining material.
2. Before each test, lubricate all o-rings with high-temperature grease to
ensure a proper t and increased life.
3. Periodically inspect valve stems for damage or wear. Replace any that no
longer have a sharp point on the end.
To Next Page
Loading...
