Do you have a question about the Ofna Racing JAMMIN X1-CRT and is the answer not in the manual?
Lists required glow fuel, batteries, and related accessories for engine operation.
Details the setup and connection of the radio control unit for car operation.
Lists essential tools that are not supplied with the kit.
Guidelines on selecting safe and appropriate areas for operating the RC car.
Safety instructions for handling and storing glow fuel, emphasizing its flammable and poisonous nature.
Procedures for first-time engine starting, break-in, emergency stopping, and post-run storage.
Important safety warnings regarding the car's speed, hot parts, rotating components, and radio control.
Step-by-step instructions for assembling the front, rear, and center differentials.
Instructions for assembling the front and center gear cases.
Guides the assembly of the front shock stay and knuckle arms.
Details the assembly of the front suspension arms and related components.
Instructions for assembling the servo saver mechanism for precise steering control.
Steps to assemble the front stabilizer bar for improved handling.
Instructions for assembling the steering tie-rods for proper steering geometry.
Details the assembly process for the rear gear case.
Guides the installation and mounting of the radio tray and associated components.
Instructions for installing the receiver box and connecting the radio system.
Steps for assembling and mounting the fuel tank.
Instructions for assembling the clutch mechanism and flywheel.
Step-by-step guide for assembling the front shock absorbers.
Procedures for adjusting throttle and brake linkages for optimal engine control.
Detailed instructions for assembling the rear shock absorbers.
Steps for mounting the front shock absorbers onto the chassis.
Instructions for assembling and installing the air filter system.
Steps for attaching the front bumper to the chassis.
Instructions for assembling and mounting the rear wing.
Guidelines for cutting, painting, and preparing the car's body shell.
How to adjust camber and toe-in/out for front and rear wheels.
Adjusting shock angles and rear wheelbase for optimal suspension performance.
Procedures for setting the caster angle and its effect on steering.
Solutions for common problems when the engine fails to start or stops unexpectedly.
Troubleshooting tips for slow throttle response, loss of control, and slow steering.
| Scale | 1/8 |
|---|---|
| Drive | 4WD |
| Length | 560 mm |
| Width | 415 mm |
| Engine | 21-28 size engine |
| Chassis | Aluminum |
| Suspension | Independent |
| Shocks | Oil-filled |
| Body | Polycarbonate |
| Transmission | 2-speed automatic |











