OHAUS 750-S0 - User Manual

Instuction Manual
Please read this manual before you use your
Ohaus Triple Beam Balance.
Triple Beam
Balance
P/N 3258-00 A © Ohaus Corporation 2005, all rights reserved / todos los
derechos reservados.
Printed in Poland / Impreso en Polonia
LIMITED WARRANTY
Ohaus products are warranted against defects in, materials and workmanship
from the date of delivery through the duration of the warranty period. During
the warranty period Ohaus will repair, or, at its option, replace any
component(s) that proves to be defective at no charge, provided that the
product is returned, freight prepaid, to Ohaus.
This warranty does not apply if the product has been damaged by accident or
misuse, exposed to radioactive or corrosive materials, has foreign material
penetrating to the inside of the product or as a resuft of service or modification
by other than Ohaus. In lieu of a properly returned warranty registration card,
the warranty period shall begin on the date of shipment to the authorized
dealer. No other express or implied warranty is given by Ohaus Corporation.
Ohaus Corporation shall not be liable for any consequential damages.
As warranty legislation differs from state to state and country to country,
please contact Ohaus or your local Ohaus dealer for further details.
REPLACEMENT PARTS LISTS
IDENT. PART
NO. NO. DESCRIPTION REQD MODELS
1 3045-00 Scale Plate 1 750-S0
SST - 6" dia. 750-SW
760-00
2 1039-02 Scale Pan 1 710-00
6" dia. x 3/4" 710-T0
1064-30 Cross 1
3 80250400 Scoop, SST 1 720-S0
12" x 6
2-3/4" deep
4 1101-20 Scoop, 1 730-00
Polypropylene
12" x 6" x 2-3/4" deep
5 3043-20 Specimen Pan 1 730-00
3052-00 Cover 1
2570-21 Cross 1
6 1023-10 Balance Cup 1 All
7 1034-00 Friction Plate 3 All
1247-00 Friction Plate w/Tab 1
8 1008-05 Bearing 4 All
9 1035-03 Bearing Cover 4 All
10 3134-02 500g Poise 1 All
Assembly
11 3135-21 100g Poise 1 All
Assembly
12 9704-00 225g Tare 1 760-00
710-T0
Accessories
183-00 Specific Gravity Rod and Clamp
703-00 Footed Polypropylene Scoop, 12" x 6" x 2-3/4" and Counterweight
703-S0 Footed Stainless Steel Scoop,12" x 6" x 2-3/4" and Counterweight
706-00 Vinyl Dust Cover
707-00 Metric Attachment Weight Set: two 1000g, one 500g
0213456
7
8
9
10 g
200100 300 400 500 g0
30 40 50 60
70
80
90
100 g
0
1
23
4
5
6
7
8
9
10
11
/
//
/
NOTE: Item 12 not shown on illustration is
loacated at rear of balance.
METRIC MODEL
METRICA MODELOS
*3258-00*
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431
Visit us at www.TestEquipmentDepot.com

Summary

Instruction Manual

Triple Beam Balance Overview

Provides an introduction to the Ohaus Triple Beam Balance and its instruction manual.

Replacement Parts Lists

Lists available replacement parts for the Ohaus Triple Beam Balance with part numbers and applicable models.

Accessories

Lists optional accessories that can be used with the Ohaus Triple Beam Balance.

Limited Warranty

Details the warranty terms and conditions provided by Ohaus for their products.

Operating the Balance

Unpacking and Setup

Instructions for carefully unpacking the balance and setting it up on a flat surface.

Zeroing and Weighing

Guidance on how to zero the balance and the procedure for weighing specimens.

Tare Functionality

Explanation of how to use the tare poise to counterbalance containers.

Care and Maintenance

Recommendations for keeping the balance clean and maintaining its condition.

Features

Highlights the key features of the balance, such as magnetic damping and tiered beam visibility.

Specific Gravity Determination

Describes how to use an accessory for determining the specific gravity of specimens.

Specifications

Provides technical specifications for the Metric Series balance, including capacity and readability.

OHAUS 750-S0 Specifications

General

Model	750-S0
Category	Scales
Manufacturer	OHAUS
Capacity	750 g
Readability	0.1 g
Calibration	External Calibration
Display Type	LCD
Power Source	AC Adapter (Included)