58
SEW 7050
EN
GENERAL WARNINGS
• Do not obstruct the ventilation and heat elimination openings or ssures.
• If the power cord of this appliance is damaged, it must be changed exclusively
by a technical assistance centre authorized by the manufacturer, since special
tools are necessary.
• This appliance electrical safety is ensured only when the appliance itself
is correctly connected to an ecient grounding system as required by
the current electrical safety standards.
• Use only the power supply unit (27) and the foot switch (26) supplied.
• It is necessary to check this fundamental safety condition and, in case of
doubts, ask for an accurate system check from professionally qualified
personnel.
The manufacturer cannot be considered liable for possible damages caused
by the lack of grounding of the system.
• Before carrying out any operation turn o the appliance and disconnect the
power plug from the outlet.
• Don’t connect the appliance to the power supply through external timers or
remote control systems.
Make sure that the power cord doesn’t protrude from the bearing
plane in order to prevent someone from, even inadvertently,
pulling it toppling the appliance.
☞
Place the appliance on an horizontal and very stable bearing plane,
whose surface is not delicate (ex. lacquered furniture, tablecloths
etc.). Make sure that the appliance is safely supported.
Place the appliance far from sinks and taps.
To Next Page
Loading...