ohmex SEW 7050 - Technical Specifications and Components; Technical Data; Appliance Description

62
SEW 7050
EN
1. Motor body
2. Coil winding tension disc
3. LED light
4. Coil holder support
5. Coil winding shaft
6. Handwheel
7. Speed selector
OFF = Appliance switched o
L = Minimum speed
H = Maximum speed
8. Foot lifting lever
9. Foot adjustment lever
10. Needle
11. Thread cutter
12. Needle clamp screw
13. Foot
13a. Foot for buttonhole
14. Handle
15. Spool holder
16. Foot support
17. Stitch selection knob
18. Reverse sewing selector
19. Accessory drawer
20. Pedal socket
21. Power supply socket
22. Upper thread clamp
23. Upper thread tension adjustment
knob
24. Ruler
25. Compartment for cus/bottom of
trousers
26. Foot switch
27. Mains power supply
28. Threader
APPLIANCE DESCRIPTION (Fig. F1)
TECHNICAL DATA
Power supply
- Input: ........................................................ 100-240V~ 50/60Hz 0.4A
- Output: ..................................................... 6.0V/1.2A
- Power: ....................................................... 7.2W
- 12 types of stitches
- Buttonhole function
- Reverse sewing
- Upper thread tension check
- Cutter
- Operation with batteries
- Handle for easy transport
Accessories supplied:
- Mains power supply
- Sewing Start/Stop pedal
- Threader
- Buttonhole foot
- 2 needles
- 2 spools
- 2 coils