62
TPK 2370
EN
USE
> > Use
• Place the appliance on an horizontal and
stable plane whose surface is not sensitive
to high temperatures.
Make sure that all the feet (2) are supported
on the plane.
• Unroll the power cord completely.
• Connect the thermostat (7) to the socket (4).
• Connect the power plug to the power
socket making sure that the mains voltage
corresponds to the one indicated on the
rating label.
• Turn the thermostat (7) on the maximum temperature.
• Wait about 8÷10 minutes so that the plate heats up.
During this appliance rst use a slight smoke emission accompanied by
a particular smell could occur. This is a normal phenomenon that will
disappear automatically.
Prepare an appropriate ventilation.
230V
~
50Hz
4
7
To Next Page
Loading...