OHTAKE OM-26M - Table of Contents; Overview of this Machine; Before Use

－
1
－
Contents
1. OVERVIEW OF THIS MACHINE -------------------- 1
2. BEFORE USE -------------------------------------------- 1
3. OPERATING PRECAUTIONS ----------------------- 2
4. NAMES OF MACHINE PARTS ---------------------- 5
5. ADJUSTMENTS AND CHECKS BEFORE USE-------- 7
6. MAINTENANCE ----------------------------------------- 16
7. PARTS ADJUSTMENTS AND REPLACEMENTS ----- 16
8. EXTERNAL OUTPUT SIGNALS------------------- 28
9. MISCELLANEOUS ----------------------------------- 30
10. TROUBLESHOOTING ------------------------------- 32
11. SPECIFICATIONS ------------------------------------- 38
12. EXTERNAL DIMENSIONS -------------------------- 40
13. WARRANTY -------------------------------------------- 41
２．
BEFORE USE
Please check for the following accessories before operating the machine.
＊
Instruction Manual 1 copy
＊
AC Adapter 1 unit
＊
Hexagonal Wrench 1 piece
＊
Screwdriver 1 piece
＊
Ground Wire 1 piece
１．
OVERVIEW OF THIS MACHINE
Thank you very much for selecting our Automatic Screw Feeder "OM-26M series ".
This machine can line up screws (Type M2 - M6) and supplies them one by one to help
the efciency of screw fastening work.
Different sizes of screws can be used by changing the rail and parts of the escaper assembly.
It can be used wherever there is a power source for an AC adapter.
Only steel screws may be used with this machine. Stainless steel or plastic screws cannot be used.