OK. OAC 2221 User Manual (English)

Questions and Answers:

D
Dana BrownAug 12, 2025
Why my OK. OAC 2221 does not start?
- M
  Michael ScottAug 12, 2025
  If your OK. Air Conditioner isn't starting, there might be a few reasons: * It's not properly connected to the power supply. Ensure it's correctly plugged in. * The power cord or plug could be defective. In this case, have it checked by a specialist. * There might be another electrical defect. It's best to have a specialist examine the product. * An error might have occurred. Refer to the section on protection and error codes. * The remote control could be faulty. Consult the information provided about the remote control.
A
Amanda AllenAug 16, 2025
How to fix OK. OAC 2221 Air Conditioner remote control not working?
- C
  christopher50Aug 16, 2025
  If the remote control for your OK. Air Conditioner isn't working, consider these possibilities: * The batteries might be exhausted. Try replacing them. * The remote control might be out of range, or the signal is being disrupted by an obstacle. Move closer to the product and remove any obstructions. * There could be an electrical defect in the remote control. Have it checked by a specialist.
A
Adriana DennisAug 19, 2025
Why is my OK. OAC 2221 Air Conditioner not cooling properly?
- S
  Selena KingAug 19, 2025
  If your OK. Air Conditioner isn't cooling effectively, consider the following: * A nearby heat source might be hindering the cooling process. Try relocating the product or removing the heat source. * Insufficient ventilation could be the issue. Make sure there's enough space around the unit for proper airflow. * Open windows or doors in the room can affect cooling. Close any open windows or doors. * The exhaust hose might not be properly connected or could be blocked. Ensure it's correctly connected and clear of any obstructions. * Blocked air filters can reduce cooling performance. Clean the air filters. * The temperature might be set too high. Adjust the temperature controller to a lower setting.