C3200n User’s Guide
Introduction • 9
Changing the display language
C53_Panel.eps
1. Press MENU + repeatedly until you see
SYSTEM CONFIG MENU
POWER SAVE DELAY TIME
2. Press ENTER.
3. Press MENU + repeatedly until you see
SYSTEM CONFIG MENU
LANGUAGE
4. Press ENTER.
5. Press MENU + and/or MENU – repeatedly until you see
the language you wish to select.
6. Press ENTER to select this language.
7. Press ON LINE to exit the menu and return the printer to
standby.
BACK ENTER
OLN INE
CANCEL
MENU
READY
ATTENTION
To Next Page
Loading...
Need help?
General
