Oki Data CONFIDENTIAL
1. CONFIGURATION
44983601TH Rev.1
1
-
7 /
(8) Paper feeding method Automatic feeding
(9) Paperejectingmethod Facedown(Rearejecting)/Faceup(Frontejecting)
(10) Resolution (Max.) 2400 × 600 dots / inch (B401/B411)
1200 × 1200 dots / inch (B431)
(11) Inputelectricity AC100V±10V,50/60Hz±1Hz(B411/B431)
(12) Electricityconsumption Upandrunning:Maximum 900W,
Average 510W (25°C)(B401/B411)
550W (25°C)(B431)
Ready and waiting: Average 70W (25°C)
Power-saving mode: (Without option) Approx. 6.5W or less
(With option) Approx. 7.5W
(13) Temperature and Humidity
(14)Operatingnoise InPrinting :Averagebelow53dBAforSLOW.(B401/B411)
(RageAbased :Averagebelow54dBAforSLOW.(B431)
onJISZ9831) Readyandwaiting:Averagebelow30dBAforSLOW.
At power save : No sound (Background level)
(15) Consumables Toner cartridge : Approx. 1,500 piece / Approx. 2,500 piece / Approx. 3,000 piece
/Approx. 4,000 piece/Approx. 10,000 piece(A4 ISO/IEC 19752
Continuous printing as printing paten. But, except the 1st Toner
cartridge)
Imagedrum :Approx.44,000piece(Continuouslysingle-sideprintingofA4)
Cartridge : Approx. 30,000 piece (Single-side3pages/job)At Power save off.
Approx. 1,7500 piece (Single-side1page/job)At Power save off.
*B401Approx.25,000piece(Single-side3pages/job)
At Power save off..
10
28
32
20 80
Relative humidity (%)
6QBOESVOOJOH
Tenperature Humidity
Upand
running
10~32
20~80%RH (Relative Humidity) No condensation.
However, Maximum temperature of wet ball should
be 25°C.
Power switch
off
0~43
10~90%RH (Relative Temperature) No
condensation. However, Maximum temperature of
wet ball should be 26.8°C.
Keeping -10~43
10~90%RH (Relative Humidity) No condensation.
However, Maximum temperature of wet ball should
be 26.8°C.