Oki B431L6

4. ADJUSTMENT
Oki Data CONFIDENTIAL
44983601TH Rev.1
4-3 /
Category
Operation panel display
Default
value
Function
* Only English is supported for panel display
Setting item
(Uppercase)
Setting item
(Lowercase)
FILESYS
MAINTE1
(*1)
FLASH
INITIALIZE
EXECUTE
- InitializeresidentFLASH.
PressEnterswitchthenthefollowingconrmingmessageis
displayed.
AREYOUSURE?
YES/NO
IfNOischosen,itreturnstothepreviousmenudisplay.
IfYESischosen,itrebootsautomaticallyandexecutesthe
initializationofFlashMemory.
[Display condition]
"ADMINMENU"-"FILESYSMAINTE2"-"INITIALLOCK"is
NO.
FILESYS
MAINTE2
(*1)
INITIALLOCK YES
NO
* Do not allow to modify setting accompanied by the
initializationofBlockDevice(FLASH).
IfsetthismenutoYES,item"ADMINMENU","FILESYS
MAINTE1"isnotdisplayedontheoperationpanel.
[Display condition]
"PRINTSTATISTICS"-"USAGEREPORT"ofusermenuis
Disable.
LANGUAGE
MENU
LANG
INITIALIZE
EXECUTE
- Initialize(Delete)LEDmessagelethatisloadedonFLASH.
Press Enter switch then the following message is displayed.
AREYOUSURE?
YES/NO
IfNOisselected,returntooriginalMENUdisplay.
IfYESisselected,immediatelyremovetheMENUandstarts
to delete operation after reboot.
Only support Multi-language model.
PSMENU
(*1)
L1TRAY TYPE1
TYPE2
* AssettingTYPE1,theselectingnumberoflevel1operator
trayisenablefrom1,yetitisfrom0assettingTYPE2,
Only B431 series is displayed.
SIDM
MENU
SIDMMANUAL
ID#
0
~
2
~
9
*J
*E
SetPnspeciedbyMANUALinCSFCONTROLCOMMAND
OFMANUAL-1IDNo.FX/PPR/ESCPEmu(ESCEMPn).
Default value:
Japanorientedis"0",ExceptJapanorientedis"2".
SIDMMANUAL
2ID#
0
~
3
~
9
*
SetPnspeciedbyMANUALinCSFCONTROLCOMMAND
ofMANUAL-2IDNo.FX/PPR/ESCPEmu(ESCEMPn).
SIDMMPTRAY
ID#
0
~
4
~
9
*
SetPnspeciedbyTRAY0(MPTray)inCSFCONTROL
COMMANDofMPTrayIDNo.FX/PPREmu(ESCEMPn).
SIDMTRAY1
ID#
0
1
~
9
*
SetPnspeciedbyTRAY1inCSFCONTROLCOMMAND
ofTray1IDNo.FX/PPR/ESCPEmu(ESCEMPn).
SIDMTRAY2
ID#
0
~
2
~
5
~
9
*J
*E
SetPnspeciedbyTRAY1inCSFCONTROLCOMMAND
(ESCEMPn)ofTray2IDNo.FX/PPR/ESCPEmu.
DefaultValue:
Japanorientedis"2",ExceptJapanorientedis"5".
[Display condition]
Tray 2 implementation