B6250 Network Guide> 25
NOTE
> If several parameters are specified in one "lpr" command,
data may not be printed correctly.
> The system default is used if no parameter is specified.
> If the print data specifies 2 sided or 1 sided printing, the
specification by the data becomes valid and overrides that
by -C option.
Specifying Paper Size and 2 sided Printing
Select a paper size and a binding type. The following parameters can
be specified:
NOTE
> If several parameters are specified in one "lpr" command,
data may not be printed correctly.
TUMBLE/tumble 2 sided printing as follows:
SIMP/simp 1 sided printing
PARAMETER DESCRIPTION
A4D/a4d
2 sided printing on A4 paper and long-
side binding
A4T/a4t 2 sided printing on A4 paper and short-
side binding
A5D/a5d 2 sided printing on A5 paper and long-
side binding
A5T/a5t 2 sided printing on A5 paper and short-
side binding
B5D/b5d 2 sided printing on 85 paper and long-
side binding
B5T/b5t 2 sided printing on B5 paper and short-
side binding
PARAMETER DESCRIPTION
To Next Page
Loading...
Need help?
General
