Oki B6300 Series Reference Guide

6.6 Cleaning the Printer 125
Initializing Print Meter Data
1. Press the <MENU> button to display the Menu screen.
2. Press the < > or < > button until [Admin Menu] is displayed, then press the < >
button.
3. Press the < > or < > button until [Init/Del Data] is displayed, then press the < >
button.
4. Press the < > or < > button until [Print Meter] is displayed, then press the < >
button.
5. Press the <FEED/SELECT> button.
Initialization will start.
6. Press the <MENU> button.
6.6 Cleaning the Printer
This section describes how to clean the printer in order to maintain it in good condition and
print clean printouts all the time.
CAUTION
• Be sure to switch off and unplug the machine before accessing the interior of the
machine for cleaning, maintenance, or fault clearance. Access to a live machine’s
interior can cause electric shock.
Cleaning the Exterior
Clean the exterior of the printer about once a month. Wipe the parts with a wet but well-
wrung soft cloth. Then wipe with another dry soft cloth. For stubborn stains, moisten a soft
cloth with a small amount of neutral detergent, and gently wipe the stain off.
Important
• Do not spray the detergent directly on the printer. The liquid detergent may enter the printer through a
gap and cause problems. Never use cleaning agents other than water or neutral detergent.

Oki B6300 Series Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Monthly Duty Cycle	Up to 100, 000 pages
Connectivity	Ethernet
Memory	64 MB, upgradable to 320 MB
Duplex Printing	Standard
Printer Language	PCL 5e, PCL 6, PostScript 3