8 - English
Reproductive Toxicity:
Not classified as “Reproductive
and Development chemicals.”
Teratogenicity
: Not available.
Mutagenicity (Ames Assay):
Negative.
Name of Toxicologically Synergistic products:
Not
available.
Reactivity Data ________________________
Stability:
Stable
Condition to Avoid:
Do not expose to temperature above
200°C.
Incompatibility (Materials to Avoid):
Avoid exposure to
strong oxidizers.
Hazardous Polymerization:
Will not occur.
Condition to Avoid:
None.
Hazardous Decomposition Products:
Carbon Oxide.
Preventive Measures____________________
Personal Protective Equipment
Respiratory Protection:
Not normally required. For large
spills (such as in bulk processing facilities), use dust
respirator during cleanup.
Protective Gloves and/or Eye Protection:
Not normally
required. For large spills (such as in bulk processing
facilities), use rubber gloves and safety goggles during
cleanup.
Engineering Controls
Ventilation:
Outside of normal ventilation, not normally
required. In bulk processing facilities, local exhaust
ventilation may be required.
Other Protective Equipment and/or Hygienic
Practices:
None
Spill Cleanup
Small Spills
Remove sources of ignition.
Sweep up or soak up with a damp (cold water) cloth.
Large Spills (such as in processing facilities)
Remove sources of ignition.
Keep unnecessary and unprotected personnel away
from area.
Wear protective gear: respirator, rubber gloves,
goggles.
After removing the bulk of the spill, wipe up remainder
with a wet (cold water) cloth. Place waste material in a
closed container.
Waste Disposal
Follow appropriate federal, state and local regulations.
Precautions
Precautions for Handling or Storage:
Do not incinerate
toner or a print cartridge. Do not disassemble a print
cartridge. Keep in a cool, dry, well-ventilated place. Keep out
of reach of children.
Other Precautions:
None
Shipping Information
Special Shipping Information:
Transport in accordance
with national and local regulations.
User’s Responsibility____________________
This bulletin cannot cover all possible situations which the
user may experience when using this product. Each aspect of
your operation must be examined in regard to if, or where,
additional precautions may be necessary. All health and safety
information contained in this bulletin must be provided to your
employees or customers. It is your responsibility to use this
information to develop appropriate work practice guidelines
and employee instructional programs for your operation.
Preparation Date of MSDS _______________
Date:
February 1, 2009
Prepared by:
Oki Data Americas, Inc.
Engineering Services Department
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
my.okidata.com
To Next Page
Loading...
Need help?
General
Weight and Dimensions
