English • 4
2 Click Install User’s Guide.
3 Follow the on-screen instructions to
complete the installation.
4 To view the manuals, click Start > All
Programs > OkiData > C330/C530 User
Guide.
Activate Printer Options
You can configure the options manually or, for
TCP/IP network connections, you can
configure the options automatically using the
Two-Way Communications feature.
To Configure PostScript Driver Options
Automatically
If you have a TCP/IP enabled network, you
can automatically update your printer driver to
reflect the options currently installed on the
printer.
1 Click Start > Control Panel > Printers.
2 Right click the OKI C330/C530 icon.
3 Click Properties.
4 Click the Installable Options tab.
5 Select Two-Way Communications.
6 Type the IP address or DNS name.
7 To display the printer’s current default
setting when opened, select Update Fiery
Driver When Opened.
8 Click Update. Click OK.
To Configure PostScript and PCL
Options Manually
1 Click Start > Control Panel > Printers on the
Windows task bar.
2 Right-click the printer icon and choose
Properties.
3 Click on the Installable Options tab in the PS
driver or the Device Options tab in the PCL
driver.
4 In the PS driver, scroll to Installable Options
and select options; in the PCL driver select
the appropriate check box in Available
Options.
5 Click OK to activate the current settings.
Windows: USB Setup
Install the Driver
1 Turn the Printer OFF.
2 Insert the CD in the CD-ROM drive. The CD
will autorun.
3 Select your language.
4 Accept the license agreement.
5 Click Install Driver.
6 Select local printer.
7 When prompted to select the port you want
your printer to use, select USB.
8 When prompted, select your printer model
and then select printer emulation (PS or
PCL).
9 When prompted, connect the USB cable and
switch the printer ON.
Test the Printer Driver Installation
To make sure the printer driver is correctly
installed, print a page from any program.
Reinstall the driver if the installation failed.
To Next Page
Loading...
