Why is my Oki C3200n Printer printing black, vertical lines?
- BBrittany SmithSep 6, 2025
If your Oki Printer is producing black, vertical lines, the image drum may be damaged. Replace the image drum.
Why is my Oki C3200n Printer printing black, vertical lines?
If your Oki Printer is producing black, vertical lines, the image drum may be damaged. Replace the image drum.
What to do if Oki C3200n displays 'CHECK MP TRAY 390: PAPER :JAM'?
To resolve a 'CHECK MP TRAY 390: PAPER :JAM' error on your Oki Printer, clear the paper jam.
What to do if Oki Printer doesn't print after clearing jam?
If your Oki Printer continues not to print after clearing a jam, raise and gently lower the top cover, especially if the paper jam was removed from behind the front cover.
Why does my Oki C3200n frequently jam?
To address frequent paper jams in your Oki Printer, ensure the printer is on a stable, level surface and that you're using the correct type of paper. Store paper within specified temperature and humidity levels. Remove any creased or wrinkled paper, and adjust the tray or manual feed guides. Also, verify the correct paper feed selection in the printer driver's Properties Setup tab.
Why is my Oki C3200n Printer printing periodic black lateral lines or spots?
If your Oki Printer is producing periodic black lateral lines or spots, the green surface of the image drum might be damaged or dirty. If damaged, replace the image drum cartridge. If dirty, gently wipe the image drum with soft tissue. If the lines or spots occur at intervals of approximately 113 mm, the fuser roller is damaged; change the fuser.
Why can't I configure USB connection for my Oki C3200n?
To resolve USB configuration problems with your Oki Printer, use a USB cable meeting specification Ver.1.1.
What to do if Oki C3200n Printer cannot print desired color because toner is low?
If you cannot print the desired color on your Oki Printer because the toner is low, replace the toner cartridge.
How to resolve blurred print (one side of page) on Oki C3200n Printer?
If your Oki Printer produces blurred print on one side of the page, the top cover might not be properly closed. Press the cover release latch, open, and then close the cover.
Why does my Oki Printer say 'INSTALL PAPER CASSETTE 430: TRAY 1 MISSING'?
If your Oki Printer displays 'INSTALL PAPER CASSETTE 430: TRAY 1 MISSING', it means Tray 1 is not installed. Install the missing tray to resolve the issue.
What does 'YYYY nnn: FATAL ERROR' mean on my Oki Printer?
If you see 'YYYY nnn: FATAL ERROR' on your Oki Printer, try turning it off and then back on. If the problem persists, write down the message, including the error number “nnn,” and any scrolling octets, then contact your authorized Oki Data Service Dealer.
Printer Type | Color Laser Printer |
---|---|
Print Speed (Black) | 20 ppm |
Print Speed (Color) | 20 ppm |
Print Resolution | 1200 x 600 dpi |
Resolution | 1200 x 600 dpi |
Monthly Duty Cycle | 30, 000 pages |
Standard Paper Capacity | 250 sheets |
Duplex Printing | Manual |
Weight | 48.5 lbs |
Connectivity | Ethernet, USB |
Operating System Compatibility | Windows, Mac OS |
Media Sizes | A4, A5, Letter, Legal |
Step-by-step guide for loading paper into the main trays.
Details on replacing the toner cartridges.
Information on replacing the image drums.
Instructions for replacing the transfer belt unit.
Guidance on replacing the fuser unit.
How to navigate and modify printer menu settings.
Explains causes and general procedures for printer paper jams.
Specific steps to clear a paper jam in the top cover area.
Detailed steps for clearing a jam within the duplexer unit.
Steps to clear a paper jam originating from the MP Tray.
Interprets and provides solutions for printer display messages.
Addresses issues like blurred print, fading, lines, and smudging.
Solutions for configuring and resolving USB connection issues.
How the printer driver settings interact with the operator panel.
Instructions for printing on both sides of the paper.