11 - English
Preventive Measures ___________
Personal Protective Equipment
Respiratory Protection:
Not normally required. For
large spills, use dust respirator during cleanup.
Protective Gloves and/or Eye Protection:
Not
normally required. For large spills, use rubber gloves
and safety goggles during cleanup.
Engineering Controls
Ventilation:
Outside of normal ventilation, not normally
required.
Other Protective Equipment and/or Hygienic
Practices:
None.
Spill Cleanup
Small Spills
1. Remove sources of ignition.
2. Carefully clean up the spill with a wet cloth, avoiding
inhalation of fine dust.
Large Spills
1. Remove sources of ignition and keep unnecessary
and unprotected personnel away from area.
2. Wear protective gear: respirator, rubber gloves,
safety goggles.
3. Vacuum the spill, then wipe up remainder with a wet
cloth.
Waste Disposal
• Prevent release of material into natural waters and
sewers.
• Follow appropriate federal, state and local regulations.
• Small amounts can be incinerated.
Careful!
Combustion can create harmful gases such
as carbon monoxide and nitrogen oxides.
• Large amounts must be passed to a licensed waste
contractor.
Precautions
Precautions for Handling or Storage:
Protect from
the sun. Store in a cool room, under 104°F (40°C). Keep
out of reach of children.
Other Precautions:
None.
Shipping Information
Special Shipping Information:
Non hazardous.
Handle container carefully to avoid shock. Do not drop.
Keep dry.
User’s Responsibility_____________
This bulletin cannot cover all possible situations which the
user may experience when using this product. Each
aspect of your operation must be examined in regard to
if, or where, additional precautions may be necessary. All
health and safety information contained in this bulletin
must be provided to your employees or customers. It is
your responsibility to use this information to develop
appropriate work practice guidelines and employee
instructional programs for your operation.
Preparation Date of MSDS
Date:
April 9, 2013.
.
Prepared by:
Oki Data Americas, Inc.
Engineering Services Department.
2000 Bishops Gate Blvd.
Mt. Laurel, NJ 08054-4620
Tel: (856) 235-2600
Fax: (856) 222-5320
http://
WWW.OKIPRINTINGSOLUTIONS.COM
my.okidata.com
To Next Page
Loading...
Need help?
General
Weight and Dimensions
