Menu functions > 43
RESOLUTION 600DPI
600x1200DPI
600DPI M-LEVEL
Sets the default resolution for printing (dots per inch).
600x1200DPI uses more memory and requires more
time to process, but prints at a higher quality.
TONER SAVE LEVEL OFF
LOW
MIDDLE
HIGH
Set the toner save level.
TONER SAVE COLOUR ALL
EXCEPT 100% BLACK
Specify toner save for 100% black.
All: Enables toner save for all colours.
Except 100% Black: Disables toner save for 100%
black.
TONER SAVE MODE ON
OFF
This function works effectively only if the data input is
color RGB data. This setting is valid in PS and PCL, but
does not take effect in the following cases.
(1) PS: If Color Matching is set OFF.
(2) PS: If any setting other than ASIC Color Matching is
set.
(3) PS: CMYK data when Ink Simulation Mode is used
(valid in any other cases except Case (1) and Case (2)
above as long as data is RGB).
(4) PCL binary data (Color/Monochrome).
MONO-PRINT SPEED AUTO
COLOR SPEED
NORMAL SPEED
Sets the monochrome print speed. Prints at the most
appropriate speed for page process if Auto is set.
Prints always at the color print speed if Color is set.
Prints always at the monochrome print speed if Normal
is set.
ORIENTATION PORTRAIT
LANDSCAPE
Selects default page orientation between portrait (tall)
and landscape (wide). - (PCL, IBMPPR & EPSON FX
only)
LINES PER PAGE 5~64~128LINES Sets the number of lines of text per page when raw text
is received from systems other than Windows. The
default for A4 portrait is 64, and for Letter is 60. - (PCL
only)
EDIT SIZE CASSETTE SIZE
A4 /A5/ A6 / B5
LEGAL14
LEGAL13.5
LEGAL13
LETTER
EXECUTIVE
CUSTOM
COM-9 ENVELOPE
COM-10 ENVELOPE
MONARCH ENV
DL ENVELOPE
C5 ENVELOPE
INDEX CARD
Sets the size of the printable page area to match the
size of paper in use. This is not the same as the physical
paper size, which is always slightly larger. For
dimensions of physical page sizes, see “Paper
Recommendations” section in this guide.
X DIMENSION 64MILLIMETER
~
210MILLIMETER
~
216MILLIMETER
Specifies paper width of Custom paper as a default
value.
Sets a paper size at right angles to the paper run
direction.
ITEM SETTINGS EXPLANATION