Installing upgrades> 69
S
ECOND
PAPER
TRAY
An additional paper tray can be installed and, when combined
with the standard paper tray, increases the paper capacity to 830
sheets (approximately).
Installation
1. Switch off the printer and disconnect the power cable and
printer interface cable.
2. Lower the printer gently on to the additional paper tray
unit aligning the holes and connection socket on the base
of the printer with the locating pegs and plug on the
additional paper tray unit.
3. Connect the printer interface cable and power cable, then
switch on the printer.
All that remains is to adjust the Windows printer driver to make
full use of the new features.
WARNING!
The printer weighs 25 kg. 2 people are required to lift
the printer safely and prevent any personal injury.
To Next Page
Loading...
