66 – C330/C530 Menu Functions
CONFIG.
MENU (cont.)
NEARLIFE
LED
ENABLE
DISABLE
Enables/disables illumination
of front panel LED when
“near-end-of-life” warning of
a toner, drum, fuser, or belt
occurs.
Attention LED is lit when set-
ting is enabled, inhibited
when disabled.
ECO MODE
ON
OFF
When ON, if the machine is in
power save mode and you
send a small print job (1 or 2
pages), the machine will print
the job without warming the
fuser to the “normal” operat-
ing temperature beforehand.
When you change the setting
and exit the Admin Menu, the
machine will power cycle
then the following message is
displayed “PLEASE POWER
OFF/ON”. Switch the power
off then turn the machine
back on.
SECURITY
MENU
JOB LIMITA-
TION
OFF
ENCRYPT
ED JOB
Job limitation mode control.
Jobs other than specified
ones are rejected.
SECTION ITEM SETTING
S
EXPLANATION
To Next Page
Loading...
