Menu functions > 59
HIGH HUM.
MODE
ON
OFF
If moistened paper (*) is curled significantly
after printing, change the setting to ON.
After ON is selected, the warm-up time
before printing may take a little longer. (*)
Moistened paper means paper that has been
left in a high humidity environment.
SECURITY MENU JOB LIMITATION OFF
ENCRYPTED JOB
Job limitation mode control.
Jobs other than specified ones are rejected.
MAKE SECURE
SD-M
EXECUTE SD Card encoding function is made effective.
Formation of the cipher key and encoding
function (security mode)
information is turned on. At the same time,
it initializes the SD card.
After execution, the following confirmation
messages will appear.
Are You Sure?
Yes
No
If No is selected, the display will return to
the previous menu.
If Yes is selected, the printer will be
automatically rebooted and the
encoding function will become effective.
Display Conditions:
SD Card is installed, SD Card encoding
function invalidity and
Storage Setup > Enable Initialization >
Yes
MAKE NORMAL
SD-M
EXECUTE SD Card encoding function is set to invalid.
Deletion of the cipher key and encoding
function (security mode)
information is turned off. At the same time,
it initializes the SD card.
After execution, the following confirmation
messages will appear.
Are You Sure?
Yes
No
If No is selected, the display will return to
the previous menu.
If Yes is selected, the printer will be
automatically rebooted and the
encoding function will become invalid.
Display Conditions:
SD Card is installed, SD Card encoding
function invalidity and
Storage Setup > Enable Initialization >
Yes
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
Need help?
General
