Menu functions > 60
SECURITY MENU
(cont.)
RESET CIPHER
KEY
EXECUTE Resets a cipher key to be used on an
encrypted SD card.
When this processing is done, all data stored
on the SD card cannot
be restored.
After execution, the following confirmation
messages will appear.
Are You Sure?
Yes
No
If No is selected, the display will return to
the previous menu.
If Yes is selected, the printer will be
automatically rebooted and the
resetting of the cipher key will be executed.
Display Conditions:
> SD Card implementation
> An encrypted SD card function is enabled.
FILE SYS
MAINTE1
SD-M INITIALIZE EXECUTE Initializes the SD Card to the factory default
setting. Machine performs partition-division,
and initializes each partition.
When this menu is executed, the following
confirmation message appears.
ARE YOU SURE?
YES/NO
If “NO” is selected, the display will go back
to the source menu. If “YES” is selected, the
printer will automatically reboot and execute
SD card initialisation.
This item is displayed only if the SD card
(option) is installed.
PARTITION SIZE EXECUTE The screen will display the SD card partition
size.
This item is displayed only if the SD card
(option) is installed.
SD-M
FORMATTING
PCL
COMMON
PSE
Format the specified partition. Press the OK
button and the following message displays.
ARE YOU SURE?
YES/NO
If NO is selected, the display will go back to
the source menu. If YES is selected, the
printer will automatically reboot and initialise
the specified partition.
This item is displayed only if the SD card
(option) is installed.
FLASH
INITIALIZE
EXECUTE Initialises the resident FLASH MEMORY.
If NO is selected, the machine will go back
to the source menu.
If YES is selected, the machine will be
automatically rebooted and initialize the
FLASH memory.
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
Need help?
General
