Oki C5650dn User Manual

Network configuration > 28
IP A DDRESS S ETUP
If you only use TCP/IP and the printer has not yet been
configured, occasionally it may not be displayed on
AdminManager. You can configure the IP address of the printer
by this function.
1. Select IP Address Setup from the Setup menu.
2. Set Ethernet Address and IP
Address then select OK.
> The Ethernet Address (MAC
address) is displayed during the self-diagnostic test.
O PTION M ENU
In the [Option] menu, the following item can be selected:
ITEM EXPLANATION
Use TCP/IP
Protocol
If this item is selected, AdminManager uses TCP/IP protocol
to search/configure network interface cards.
Use IPX/SPX
Protocol
If this item is selected, AdminManager uses IPX/SPX protocol
to search/configure network interface cards.

Oki C5650dn Specifications

General

Brand	Oki
Model	C5650dn
Category	Printer
Language	English